Gas Regulators
Gas regulators take the pressure of your incoming gas to your building and step it down to an operating pressure for supply to the different types of equipment/appliances that a company may use. They are sized based on inlet pressure, outlet pressure, and required flow rate to operate the burner they feed. We offer brands from Maxitrol, Sensus, Siemens, Fisher, and more.
If you do not see the part you want below, feel free to use the chat function and see if we possibly have the part you are looking for in stock.
Manufacturers View all
What Are Gas Regulators & What Is Their Function?
Gas regulators maintain proper gas pressure
The gas coming in from the utility supply line is often at too high a pressure to allow the boiler to operate safely. Installing a gas regulator in the boiler’s gas train will make sure the pressure is stepped down to a usable level before it reaches the boiler’s furnace.
Gas regulators preserve efficiency and safety
The gas flowing in from a utility has to be kept at high pressure because it has to supply other equipment in addition to the boiler. If the pressure doesn’t drop before it reaches the burner, it can cause a range of problems.
The Role Gas Regulators Play In A Boiler
If the incoming gas is at too high a pressure when it reaches the burner, it can cause damage to the burner itself, requiring recalibration or even replacement. High gas pressure will also increase the size of the flame itself, causing heat stress in the boiler tank that can lead to cracks, leaks, and explosions. Even if it doesn’t cause immediate or obvious damage, high gas pressure will still cause fuel consumption to go up, reducing efficiency.
What Are The Effects Of A Bad Gas Regulator?
If a gas regulator goes bad, the supply pressure to the burners will either become too high or too low. If the pressure is too high, it will affect efficiency, safety, and boiler integrity. If the pressure is too low, the burner may go out, or the boiler may not produce sufficient steam.
Things To Consider About Gas Regulators:
- Gas regulators are rated for specific conditions, so be sure you always choose the right regulator for the job.
- They are sized based on inlet pressure, outlet pressure, and required flow rate.
Helpful Resources
Relevant WARE Videos on Gas Regulators
Gas Pressure Regulation Station
Gas Pressure Regulation for Boiler Combustion
How To Check the Pilot Gas Pressure
Reading Gas Pressure Gauges on Gas Train
Checking Gas Train for Leaks on a Steam Boiler
NFPA 85 Code: Gas Train and Venting
Getting the Right Gas Pressure to the Burner for Combustion
Explaining Natural Gas Curtailment
Inspecting a Honeywell Gas Valve Actuator For Leaking Fluid
Using a Vent Orifice on a Siemens Gas Regulating Actuator
Gain Efficiency Using Turbulators in a Boiler
Parts of the Boiler Room | Boiler Combustion and Steam System
Boiler Combustion Tuning and Analysis
Combustion Series Part 1: Regulators
Explore over 750+ explanatory videos on boilers and boiler systems on our Youtube channel. Our videos can help you quickly grasp complex boiler topics. Watch more here!
Relevant WARE Blog Articles on Gas Regulators
What the Heck is Liquid Natural Gas?
NFPA 85 Code: Gas Train and Venting
Our informative and educational blog content can help you gain a deeper understanding of the boiler room. Read more here!
Technical Documents
Gas Regulators FAQ
How does a gas regulator work?
As the high-pressure gas comes in, it pushes against a diaphragm that is held in place by a spring. When enough pressure builds, the diaphragm overcomes the tension of the spring and creates a small opening through which a small amount of fuel can flow.
How is the pressure adjusted in a gas regulator?
Gas regulators use a set screw or control knob to adjust the amount of spring tension holding the diaphragm in place. The lower the tension, the less pressure is required to move the diaphragm.
How often should a gas regulator be replaced?
Because they use simple moving parts and physics, gas regulators tend to last a long time. However, the components begin to wear out even under ideal conditions. For safety’s sake, it’s best to have your regulator inspected regularly, and replaced at least once every ten years.